-
The LNF-xxxxxxC4_8A
An ultra-low insertion loss cryogenic triple junction isolator/circulator operating in the 4-8 GHz frequency range. It has been designed from the ground up to meet the strict requirements of ultra-low temperature physics research. The gold-plated OFHC copper body ensures minimum loss and that this loss reaches the lowest possible temperature to minimize thermal noise. The isolator/circulator is packaged in a slim coaxial module using industry standard SMA connectors. The module measures 67.1*24.6*10.2 mm excluding the connectors.No online pricing available at this time. Please request a quote.View Datasheet
View Step File
-
LNF-ISC4_12A and LNF-CIC4_12A
Ultra-low insertion loss cryogenic isolators and circulators operating in the 4-12 GHz frequency range. They have been designed from ground up to meet the strict requirements of ultra-low temperature physics research. The gold plated OFHC copper body ensures minimum loss and that this loss reaches the lowest possible temperature to minimize thermal noise.No online pricing available at this time. Please request a quote.View Datasheet
-
LNF-XXXXC4_12A
FEATURES:- RF bandwidth: 4-12 GHz
- Insertion loss: 0.4 dB typical
- Isolation: 30 dB typical
- Port match: 16 dB typical
- RF-connectors: SMA
The LNF -xxxxC4_12A is an ultra-low insertion loss cryogenic double junction isolator/circulator operating in the 4 - 12 GHz frequency range.It has been designed from ground up to meet the strict requirements of ultra-low temperature physics research.View Data Sheet belowNo online pricing available at this time. Please request a quote.View Datasheet
View Step File
-
LNF-ISC8_12A and LNF-CIC8_12A
Ultra-low insertion loss cryogenic isolators and circulators operating in the 8-12 GHz frequency range. They have been designed from ground up to meet the strict requirements of ultra-low temperature physics research.No online pricing available at this time. Please request a quote.View Datasheet
View Step File
-
LNF-LNR65_115WD_SV
65-115 GHz Low Noise AmplifierFEATURES:- RF bandwidth: 65-115 GHz
- Noise Temperature: 260 K typical
- Noise Figure: 2.8 dB typical
- Gain: 29 dB
- DC-power: V=5 V, I=50 mA
- RF-connectors: WR10, UG-387/U
- DC-connector: 2-pin Turret Connector
- Single 5V supply only
No online pricing available at this time. Please request a quote.View Datasheet
View Step File
-
LNF-LNC0.3_14B
0.3 to 14 GHz Cryogenic Low Noise AmplifierFEATURES:- RF bandwidth: 0.3-14 GHz
- Noise Temperature: 3.6 K typical
- Noise Figure: 0.05 dB typical
- Gain: 37 dB
- DC-power: Vd=1.20 V, Id=16 mA
- One gate and one drain supply only
- RF-connectors: female SMA
- DC-connector: 9-pin female Nano-D
No online pricing available at this time. Please request a quote.View Datasheet
View Step File
-
LNF-LNC15_29B
15 to 29 GHz Cryogenic Low Noise Amplifier FEATURES:- RF bandwidth: 15-29 GHz
- Noise Temperature: 7 K typical
- Noise Figure: 0.1 dB typical
- Gain: 28 dB
- DC-power: Vd=0.60 V, Id=10 mA
- One gate and one drain supply only
- RF-connectors: female K (2.92 mm)
- DC-connector: 9-pin female Nano-D
View Datasheet
View Step File
-
LNF-LNC16_28WB
16-28 GHz Cryogenic Low Noise Amplifier FEATURES:- RF bandwidth: 16-28 GHz
- Noise Temperature: 8 K typical
- Noise Figure: 1.2 dB typical
- Gain: 28 dB
- DC-power: Vd=1.0 V, Id=16 mA
- One gate and one drain supply only
- RF-input connector: WR42, UBR 220
- RF-output connector: 2.92 mm coaxial (K)
- DC-connector: 9-pin female Nano-D
View Datasheet
View Step File
-
LNF-LNC23_42WB
23-42 GHz Cryogenic Low Noise Amplifier FEATURES:- RF bandwidth: 23-42 GHz
- Noise Temperature: 7.5 K typical
- Noise Figure: 0.11 dB typical
- Gain: 28 dB
- DC-power: Vd=0.9 V, Id=11 mA
- One gate and one drain supply only
- RF connectors: WR28, UG-599/U
- DC-connector: 9-pin female Nano-D
No online pricing available at this time. Please request a quote.View Datasheet
View Step File
-
LNF-LNC4_16C
4-16 GHz Cryogenic Low Noise Amplifier FEATURES:- RF bandwidth: 4-16 GHz
- Noise Temperature: 3.1 K typical
- Noise Figure: 0.05 dB typical
- Gain: 36 dB
- DC-power: Vd=1.1 V, Id=16 mA
- One gate and one drain supply only
- RF-connectors: female SMA
- DC-connector: 9-pin female Nano-D
No online pricing available at this time. Please request a quote.View Datasheet
View Step File
-
LNF-LNC6_20D
6-20 GHz Cryogenic Low Noise AmplifierFEATURES:- RF bandwidth: 6-20 GHz
- Noise Temperature: 3.8 K typical
- Noise Figure: 0.060 dB typical
- Gain: 32 dB
- DC-power: Vd=1.20 V, Id=18 mA
- One gate and one drain supply only
- RF-connectors: female SMA
- DC-connector: 9-pin female Nano-D
No online pricing available at this time. Please request a quote.View Datasheet
-
LNF-LNR1_15B_SV
1-15 GHz Low Noise Amplifier FEATURES:- RF bandwidth: 1-15 GHz
- Noise Temperature: 57 K typical
- Noise Figure: 0.78 dB typical
- Gain: 36 dB
- DC-power: Vds=5 V, Ids=50 mA
- Single 5V supply only
- RF-connectors: female SMA
- DC-connector: 2-Pin Turret Connector
No online pricing available at this time. Please request a quote.View Datasheet
View Step File
-
LNF-LNR10_30A_SV
10-30 GHz Low Noise Amplifier FEATURES:- RF bandwidth: 10-30 GHz
- Noise Temperature: 115 K typical
- Noise Figure: 1.45 dB typical
- Gain: 28 dB
- DC-power: Vds=5 V, Ids=40 mA
- Single 5V supply only
- RF-connectors: 2.92 mm
- DC-connector: 2-Pin Turret Connector
No online pricing available at this time. Please request a quote.View Datasheet
View Step File
-
LNF-LNR16_28WA_SV
16-28 GHz Low Noise Amplifier FEATURES:- RF bandwidth: 16-28 GHz
- Noise Temperature: 129 K typical
- Noise Figure: 1.6 dB typical
- Gain: 37 dB
- DC-power: Vds=5 V, Ids=60 mA
- Single 5V supply only
- RF-input connector: WR42, UBR 220
- RF-output connector: 2.92 mm coaxial (K)
- DC-connector: 2-pin Turret Connector
No online pricing available at this time. Please request a quote.View Datasheet
View Step File
-
LNF-LNR23_42B_SV
23-42 GHz Low Noise Amplifier FEATURES:- RF bandwidth: 23-42 GHz
- Noise Temperature: 132 K typical
- Noise Figure: 1.63 dB typical
- Gain: 27 dB
- DC-power: Vds=5 V, Ids=40 mA
- Single 5V supply only
- RF-connectors: female 2.92 mm
- DC-connector: 2-pin turret connector
No online pricing available at this time. Please request a quote.View Datasheet
-
LNF-LNR23_42WB_SV
23-42 GHz Low Noise Amplifier (Waveguide) FEATURES:- RF bandwidth: 23-42 GHz
- Noise Temperature: 111 K typical
- Noise Figure: 1.41 dB typical
- Gain: 27 dB
- DC-power: Vds=5 V, Ids=40 mA
- Single 5V supply only
- RF-connectors: WR28
- 2-pin Turret Connector
No online pricing available at this time. Please request a quote.View Datasheet
View Step File
-
LNF-LNR28_52WB_SV
28-52 GHz Low Noise AmplifierFEATURES:- RF bandwidth: 28-52 GHz
- Noise Temperature: 140 K typical
- Noise Figure: 1.70 dB typical
- Gain: 36 dB
- DC power (typical) V = 5 V, I = 50 mA
- RF-connectors: WR22, UG599/U
- DC-connector: 2-pin Turret Connector
- Single 5V supply only
View Datasheet
View Step File
-
LNF-LNR4_14C_SV
4-14 GHz Low Noise Amplifier FEATURES:- RF bandwidth: 4-14 GHz
- Noise Temperature: 57 K typical
- Noise Figure: 0.78 dB typical
- Gain: 40 dB
- DC-power: Vds=5 V, Ids=60 mA
- Single 5V supply only
- RF-connectors: female SMA
- DC-connector: 2-Pin Turret Connector
No online pricing available at this time. Please request a quote.View Datasheet
View Step File
-
LNF-LNR4_8ART
4-8 GHz Low Noise Amplifier FEATURES:- RF bandwidth: 4-8 GHz
- Noise Temperature: 32 K typical
- Noise Figure: 0.45 dB typical
- Gain: 42 dB
- DC-power: Vin=5 V, Iin=50 mA
- Single supply operation
- RF-connectors: female SMA
- DC-connector: nano 4-pin polarized connector
- Reverse polarity and overvoltage protection
No online pricing available at this time. Please request a quote.View Datasheet
View Step File
-
LNF-LNR6_20A_SV
6-20 GHz Low Noise AmplifierFEATURES:- RF bandwidth: 6-20 GHz
- Noise Temperature: 70 K typical
- Noise Figure: 0.95 dB typical
- Gain: 31 dB
- DC-power: Vds=5 V, Ids=40 mA
- Single 5V supply only
- RF-connectors: female SMA
- DC-connector: 2-pin Turret Connector
- No online pricing available at this time. Please request a quote.
View Datasheet
View Step File
-
LNF-PS_EU2 is a constant current power supply designed for LNF’s Low Noise Amplifiers. It is capable of powering up to four amplifiers simultaneously. The drain voltages are regulated and adjustable within a wide range, and the gate voltages are automatically and continuously adjusted to give a set drain current. The power supply is delivered on a standard 160×100 mm EuroCard with a DIN 41612 64 pin connector. Drain voltage and current are set by trim potentiometers on the side of the board.The user must supply +/-15 V to the board through the DIN connector. -
LNF-LNC0.3_14SA
0.3 to 14 GHz Cryogenic Low Noise Amplifier (G3PO)FEATURES:- RF bandwidth: 0.3-14 GHz
- Noise Temperature: 3.6 K typical
- Noise Figure: 0.05 dB typical
- Gain: 37 dB
- DC-power: Vd=1.2 V, Id=16 mA
- One gate and one drain supply only
- RF-connectors: Male G3PO
- DC-connector: 5-pin female strip connector
- Stackable: 140 mil pitch
No online pricing available at this time. Please request a quote.View Datasheet
View Step File
-
LNF-LNC2_4A
2 to 4 GHz Cryogenic Low Noise Amplifier FEATURES:- RF bandwidth: 2-4 GHz
- Noise Temperature: 1.3 K typical
- Noise Figure: 0.02 dB typical
- Gain: 34 dB
- DC-power: Vd=0.80 V, Id=16 mA
- One gate and one drain supply only
- RF-connectors: female SMA
- DC-connector: 9-pin female Nano-D
No online pricing available at this time. Please request a quote.View Datasheet
View Step File
-
LNF-LNC2_6B
FEATURES:- RF bandwidth: 2-6 GHz
- Noise Temperature: 1.7 K typical
- Noise Figure: 0.03 dB typical
- Gain: 35 dB
- DC-power: Vd=1.0 V, Id=22 mA
- One gate and one drain supply only
- RF-connectors: female SMA
- DC-connector: 9-pin female Nano-D
No online pricing available at this time. Please request a quote.View Datasheet
View Step File
-
LNF-LNC4_16SB
4-16 GHz Cryogenic Low Noise Amplifier (G3PO) FEATURES:- RF bandwidth: 4-16 GHz
- Noise Temperature: 3.1 K typical
- Noise Figure: 0.05 dB typical
- Gain: 36 dB
- DC-power: Vd=1.1 V, Id=16 mA
- One gate and one drain supply only
- RF-connectors: Male G3PO
- DC-connector: 5-pin female strip connector
- Stackable: 140 mil pitch
No online pricing available at this time. Please request a quote.View Datasheet
-
LNF-LNC6_20SC
6 to 20 GHz Cryogenic Low Noise Amplifier (G3PO) FEATURES- RF bandwidth: 6-20 GHz
- Noise Temperature: 3.8 K typical
- Noise Figure: 0.06 dB typical
- Gain: 32 dB
- DC-power: Vd=1.2 V, Id=18 mA
- One gate and one drain supply only
- RF-connectors: Male G3PO
- DC-connector: 5-pin female strip connector
- Stackable: 140 mil pitch
No online pricing available at this time. Please request a quote.View Datasheet
View Step File
-
LNF-LNR45_77WA
45-77 GHz Low Noise Amplifier FEATURES:- RF bandwidth: 45-77 GHz
- Noise Temperature: 210 K typical
- Noise Figure: 2.37 dB typical
- Gain: 37 dB
- DC-power: V=5 V, I=50 mA
- RF-connectors: WR15
- DC-connector: 2-pin Turret Connector
- Single 5V supply only
No online pricing available at this time. Please request a quote.View Datasheet
View Step File
-
LNF-LNC1.5_6B
1.5-6 GHz Cryogenic Low Noise AmplifierFEATURES:- RF bandwidth: 1.5-6 GHz
- Noise Temperature: 1.8 K typical
- Noise Figure: 0.03 dB typical
- Gain: 28 dB
- DC-power: Vd=1.9 V, Id=29 mA
- One gate and one drain supply only
- RF-connectors: female SMA
- DC-connector: 9-pin female Nano-D
View Datasheet
-
LNF-LNC28_52WB
28-52 GHz Cryogenic Low Noise Amplifier FEATURES:- RF bandwidth: 28-52 GHz
- Noise Temperature: 10.5 K typical
- Noise Figure: 0.15 dB typical
- Gain: 36 dB
- DC-power: Vd=1.0 V, Id=16 mA
- One gate and one drain supply only
- RF-connectors: WR22, UG599/U
- DC-connector: 9-pin female Nano-D
No online pricing available at this time. Please request a quote.View Datasheet
View Step File
-
LNF-LNC0.6_2A
LOW NOISE AMPLIFIERFEATURES:- RF bandwidth: 0.6-2 GHz
- Noise Temperature: 1.5 K typical
- Noise Figure: 0.02 dB typical
- Gain: 30 dB
- DC-power: Vd=1.0 V, Id=22 mA
- One gate and one drain supply only
- RF-connectors: female SMA
- DC-connector: 9-pin female Nano-D
No online pricing available at this time. Please request a quote.View Datasheet
View Step File
-
LNF-LNC65_115WB
65-115 GHz Cryogenic Low Noise Amplifier FEATURES:- RF bandwidth: 65-115 GHz
- Noise Temperature: 24 K typical
- Noise Figure: 0.35 dB typical
- Gain: 23 dB
- DC-power: Vd=1.00 V, Id=10 mA
- One gate and one drain supply only
- RF-connectors: WR10, UG387/U
- DC-connector: 9-pin female Nano-D
No online pricing available at this time. Please request a quote.View Datasheet
View Step File
-
LNF-LNC1.5_3.5A
1.5 to 3.5 GHz Cryogenic Low Noise Amplifier FEATURES:- RF bandwidth: 1.5-3.5 GHz
- Noise Temperature: 1.3 K typical
- Noise Figure: 0.02 dB typical
- Gain: 29 dB
- DC-power: Vd=1.50 V, Id=20 mA
- One gate and one drain supply only
- RF-connectors: female SMA
- DC-connector: 9-pin female Nano-D
View Datasheet
View Step File
-
QMC-AMP10-92351712 is a high performance power amplifier. This amp operates using a single positive voltage from 7-12VDC Internal reverse bias protection ensures reliability.Export Classification: 3A001.b.4.e.3View Data Sheet
View Step File
-
QMC-AMP12-78151621 is a high performance power amplifier. This amp operates using a single positive voltage from 7-12VDC Internal reverse bias protection ensures reliabiltyExport Classification: 3A001.b.4.e.2View Data Sheet
View Step File
-
Out of stock
QMC-MX6-10F10
Technical Specifications:- Input Frequency: 12.5 to 18.33 GHz
- Input Power: 8 to 15 dBm
- Multiplication Factor: X6
- Output Frequency: 75 to 110 GHz
- Output Power: 10 dBm min, 12 dBm typ
- DC: +8V @ 600 mA typical
- Signal Purity: 20 dBc typical
- Waveguide: WR-10, UG-387/U-M
- Export Classification Code 3A001.b.4.e.3
View Datasheet
View Step File
-
QMC-MX6-12N12Technical Specifications:- WR-12 Active Multiplier
-
Input Frequency: 11.83 to 14.33 GHz
-
Input Power: 8 to 15 dBm
-
Multiplication Factor: X6
-
Output Frequency: 71 to 86 GHz
-
Output Power: 12 dBm min, 14 dBm typ
-
DC: +8V @ 600 mA typical
-
Signal Purity: 20 dBc typical
-
Waveguide: WR-12, UG-387/U
-
Heat Sink is optional and easily removable
- ECCN: 3A001.b.4.3.e
View Datasheet
View Step File
-
LNF-ISC4_8A / LNF-CIC4_8A
An ultra-low insertion loss cryogenic isolator operating in the 4-8 GHz frequency range. The isolator has been designed from ground up to meet the strict requirements of ultra-low temperature physics research. The gold plated OFHC copper body ensures minimum loss and that this loss reaches the lowest possible temperature to minimize thermal noise. The isolator is packed in a slim coaxial module using industry standard SMA connectors.No online pricing available at this time. Please request a quote.View Datasheet
View Step File
-
QMC-AMP10-95103015 is a high performance GaN power amplifier. This amp operates using a single positive voltage from 13-16VDC Internal reverse bias protection ensures reliabilityCommercial Classification: 3A001.b.4.e.3View Data Sheet
View Step File
-
Technical Specifications:- Input Frequency: 12.5 to 18.33 GHz
- Input Power: 8 dBm typical
- Multiplication Factor: X6
- Output Frequency: 75 to 110 GHz
- Output Power: 21 dBm typical
- DC: +14V @ 400 mA typical
- Signal Purity: -20 dBc typical
- Waveguide: WR-10, UG-387/U-M
- Includes a removable Heat Sink
- This is a full band multiplier attached to a full band amplifier.
- Export Classification Code 3A001.b.4.e.3
View Datasheet
View Step File
-
QMC-AMP10-94033028 is a 28 dBm 92 to 95 GHz power amplifier. This amp operates using a single positive voltage Internal reverse bias protection ensures reliabilityCommercial Classification: 3A001.b.4.e.3View Data Sheet
View Step File
-
QMC-MX2-12N21HS is a high-performance X2 Active Multiplier. This Multiplier is designed for Excellent Signal Purity This Multiplier operates using a single positive voltage of +8 to 12VDC Internal reverse bias protection ensures reliability. "This part has the option of a removable heatsink fan"Export Classification Code 3A001.b.4.e.3View Data Sheet
View Step File
-
LNF-LNR26_62A
LNF-LNR26_62A_SV is a room temperature amplifier using LNF’s proprietary InP HEMT technology. MMIC technology ensures excellent unit-to-unit variation. The LNA is packaged in a coaxial module industry standard 1.85 mm connectors for the RF ports and 2-pin turret connectors to provide the DC. The lightweight gold plated aluminum body measures 17.80×15.15×6.80 mm excluding the connectors. The LNA is not hermetic and must be operated in a vacuum environment when below the dewpoint. All amplifiers are tested at 296 K and delivered with a test reportNo online pricing available at this time. Please request a quote.View Datasheet
View Step File
-
QMC-AMP12-73053529 is a 1W 71 to 76 GHz power amplifier. This amp operates using a single positive voltage Internal reverse bias protection ensures reliabilityExport Classification: 3A001.b.4.e.2View Data Sheet
View Step File
-
LNF-LNC0.2_3B
- Product features
- RF bandwidth: 0.2-3 GHz
- Noise Temperature: 1.6 K typical
- Noise Figure: 0.02 dB typical
- Gain: 30 dB
- DC-power: Vd=1.1 V, Id=23 mA
- One gate and one drain supply only
- RF-connectors: female SMA
- DC-connector: 9-pin female Nano-D
View Datasheet
-
QMC-AMP12-83051728 is a 28 dBm 81-86 GHz power amplifier. This amp operates using a single positive voltage Internal reverse bias protection ensures reliability Export Classification: 3A001View Data Sheet
View Step File
-
QMC-AMP12-73051731- WR-12 GaAs Power Amplifier
- Frequency: 71 to 76 GHz
- Gain: 17 dB typical
- P1dB: 29 dB typical
- PSAT: +31 dBm Minimum
- DC: +8V @ 1.33 A typical
- Waveguide: WR-12, UG-387/U
- Export Classification: 3A001.b.4.e.2
View Data Sheet
View Step File
-
QMC-AMP12-83051731 is a 31 dBm 81 to 86 GHz power amplifier.- WR-12 GaAs Power Amplifier
- Frequency: 81 to 86 GHz
- Gain: 17 dB typical
- P1dB: 29 dB typical
- PSAT: +31 dBm Minimum
- DC: +8V @ 1.6 A typical
- Waveguide: WR-12, UG-387/U
- Export Classification: 3A001.b.4.e.2
View Data Sheet
View Step File
-
QMC-MX6-12N12LP is a high performance low Pin active multiplier at a value. These multipliers operate using a single positive voltage from 7-12VDC Internal reverse bias protection ensures reliabilityExport Classification: 3A001View Data Sheet
View Step File
-
Out of stock
QMC-MX6-10F10LP is a high performance active multiplier at an excellent value. These multipliers operate using a single positive voltage from 7-12VDC Internal reverse bias protection ensures reliability Export Classification: 3A001.b.4.e.3This product has a 30 day lead time. Please advise when placing an online store order.
View Data Sheet
View Step File
-
QMC-MX4-12F13 is a high performance active multiplier at an excellant value. These multipliers operate using a single positive voltage from 7-12VDC Internal reverse bias protection ensures reliability.Export Classification: 3A001.b.4.e.3This product has a 30 day lead time. Please advise when placing an online store order.
View Data Sheet
-
Out of stock
Technical Specifications:- Input Frequency: 15 to 22.5 GHz
- Input Power: 0 to +5 dBm
- Multiplication Factor: X4
- Output Frequency: 60 to 90 GHz
- Output Power: 12 dBm min, 14 dBm typ
- DC: +8V @ 500 mA typical
- Signal Purity: -20 dBc typical
- Waveguide: WR-12, UG-387/U
- Export Classification: 3A001.b.4.e.3
View Data Sheet
View Step File
-
LNF-PS3b
Low Noise HEMT Power Supply A compact power supply designed for LNF’s Low Noise Amplifiers. . Redesigned from ground up and features new low noise electronic components for much improved performance compared to previous models. There’s also a drain voltage sense function for situations where bias wire resistance is significant. The display can be switched off for ultra-low noise operation. The power supply is powered by LNF’s Power Block, LNF-PBA.No online pricing available at this time. Please request a quote.View Datasheet
-
LNF-PBA
Low Noise Power BlockA ±12V low noise linear power supply designed to power LNF’s line of HEMT power supplies.It accepts a mains voltage of either 115 or 230 VAC selectable on the rear panel.The front panel has 8 output connectors, all delivering the ±12 VDC.No online pricing available at this time. Please request a quote.View Datasheet
-
LNF-xxxxxxC4_12A
is an ultra-low insertion loss cryogenic triple junction isolator/circulator operating in the 4-12 GHz frequency range. It has been designed from ground up to meet the strict requirements of ultra-low temperature physics research. The gold plated OFHC copper body ensures minimum loss and that this loss reaches the lowest possible temperature to minimize thermal noise. The isolator/circulator is packaged in a slim coaxial module using industry standard SMA connectors.No online pricing available at this time. Please request a quote.View Datasheet
-
LNF-xxxxC8_12A
is an ultra-low insertion loss cryogenic dual junction isolator/circulator operating in the 8-12 GHz frequency range. It has been designed from ground up to meet the strict requirements of ultra-low temperature physics research. The gold plated OFHC copper body ensures minimum loss and that this loss reaches the lowest possible temperature to minimize thermal noise. The isolator/circulator is packaged in a slim coaxial module using industry standard SMA connectors.No online pricing available at this time. Please request a quote.View Datasheet
View Step File
-
LNF-xxxxxxC8_12A
is an ultra-low insertion loss cryogenic triple junction isolator/circulator operating in the 8-12GHz frequency range. It has been designed from ground up to meet the strict requirements of ultra-low temperature physics research. The gold plated OFHC copper body ensures minimum loss and that this loss reaches the lowest possible temperature to minimize thermal noise. The isolator/circulator is packaged in a slim coaxial module using industry standard SMA connectors.No online pricing available at this time. Please request a quote.View Datasheet
View Step File
-
Out of stock
Features: RF Frequency: 26.5 to 40 GHz Insertion: 1.4 dB typical Isolation: 35 dB min, 40 dB typical Switching Speed (on/off): 10 nS max Power Handling (Peak/CW):10W max Bias: +5V@40mA, -30V@1mA TTL Control Driver: Internal Waveguide: WR-28 UG-599/U Square -
LNF-TERM4_12A
is a termination suitable for converting an LNF circulator into an isolator with a DC feed through. The DC voltage will be present at both the input and output of the isolator. They have been designed from ground up to meet the strict requirements of ultra-low temperature physics research. The gold plated OFHC copper body ensures minimum loss and that this loss reaches the lowest possible temperature to minimize thermal noise. The module measures 9.5mm * 9.5 mm* 31.4mm excluding the connectors. No online pricing available at this time. Please request a quote.View Datasheet
-
QMC-AMP15-62093324 is a 24 dBm 57 to 66 GHz power amplifier. Operates using a single positive voltage. Internal reverse bias protection ensures reliabilityExport Classification: 3A001.b.4.eView Data Sheet
View Step File
-
Description:Waveguides WR-42, WR-28, WR-22, WR-19, WR-15, WR-12, and WR-10 Lengths available 1 inch to 24 inches View Data Sheet
-
Out of stock
QMC-WC112-SFR:- WR-112 Waveguide to SMA Female Adapter
- Frequency: 7.05 to 10 GHz
- VSWR: 1.25:1 max
- Insertion Loss: 0.15 dB max
- Waveguide WR-112, UG-138/U
- Material: Aluminum with Gold Chem Film
- T-Vac compatible
View Data Sheet
-
LNF-LNR4_8ART Product features •RF bandwidth: 4-8 GHz •Noise Temperature: 32 K typical •Noise Figure: 0.45 dB typical •Gain: 42 dB •DC-power: Vin=5 V, Iin=50 mA •Single supply operation•RF-connectors: female SMA •DC-connector: nano 4-pin polarized connector •Reverse polarity and over voltage protectionNo online pricing available at this time. Please request a quote.View Datasheet
View Step File
-
Out of stock
QMC-WB19-RH385383 • WR19 H-Plane Bend • Frequency: 40 to 60 GHz • Length: 1.00’’ x 1.00’’ • Flange 1: UG383/U-M 1.125 inch round • Flange 2: UG385/U-M 0.750 inch round • Copper Waveguide • Flanges: Brass • Finish: Gold PlatedView Data Sheet
-
Out of stock
QMC-WB19-RE385 • WR-19 E Plane Waveguide Bend • Frequency: 40 to 60 GHz • Length: 1.00’’ x 1.00’’ • Flanges: UG385/U-M 0.750 inch round • Copper Waveguide • Flanges: Brass • Finish: Gold PlatedView Data Sheet
-
QMC-AMP12-83053530HS- WR-12 GaAs Power Amplifier
- Frequency: 81 to 86 GHz
- Gain: 35 dB typical
- P1dB: 28 dBm typical
- PSAT: +30 dBm Minimum
- DC: +8V @ 2.16 A typical
- Waveguide: WR-12, UG-387/U
- Comes attached to a removable Heat Sink
- Export Classification: 3A001.b.4.e.2
View Datasheet
-
QMC-AMP12-73053530HS- WR-12 GaAs Power Amplifier
- Frequency: 71 to 76 GHz
- Gain: 35 dB typical
- P1dB: 28 dBm typical
- PSAT: +30 dBm typical
- DC: +8V @ 1.9 A typical
- Waveguide: WR-12, UG-387/U
- Export Classification: 3A001.b.4.e.2
View Datasheet
-
For High Frequency Waveguide Straight QMC-WGSXX-FBBBAU WR-03 to WR-42 OFHC Copper Waveguide These OFHC copper waveguides can be used for cryogenic purposes. Flange Material: 360 Series Brass Flange Type: Round or Square Finish: Gold Plated Comes with 4 waveguide screws ------- For Low Frequency Waveguide Straight QMC-WGSXX-BBBCC WR-51, WR-62, WR-75, WR-90 OFHC Copper Waveguide These OFHC copper waveguides can be used for cryogenic purposes. Flange Material: 360 Series Brass Flange Type: Cover Flange Finish: Black Paint or Anti Tarnish Use Anti-Tarnish for cryogenic use Comes with 4 waveguide screws -
Out of stock
Product #: QMC10-ATT10-CRYO • Cryogenic Waveguide Fixed Attenuator • All Brass and Copper Metals • No Aluminum • Attenuator Card is Mica with Nichrome Metallization • W-Band • Frequency: 75 to 110 GHz • Attenuation: 10 dB • Flanges: Brass • Flange to Flange Length 2.5 inches • Waveguide: OFHC Copper • Waveguide In/Out WR-10, UG-387/U-M -
Out of stock
Product #: QMC10-ATT20-CRYO • Cryogenic Waveguide Fixed Attenuator • All Brass and Copper Metals • No Aluminum • Attenuator Card is Mica with Nichrome Metallization • W-Band • Frequency: 75 to 110 GHz • Attenuation: 20 dB • Flanges: Brass • Flange to Flange Length 2.5 inches • Waveguide: OFHC Copper • Waveguide In/Out WR-10, UG-387/U-M -
Out of stock
Raytheon BBN’s Wide Bandwidth JPA:
P/N: BBN-PS2-JPA-DEVICE-QEC- Wide Bandwidth Josephson Junction Parametric Amplifier
- Fully Characterized JPA Version
- Tunable Center Frequency: 5.0 – 7.0 GHz
- Gain: 20 dB minimum
- Instantaneous Bandwidth: 300 MHz
- Noise temperature: 295 mK @ 6.8 GHz
- Matched input: 50 Ohm
- Compact Aluminum cryo-package
- Connector In/Out: 2.92mm K connectors
- Designed for use at millikelvin temperatures
No online pricing available at this time. Please request a quote using the tab above. For Fully Assembled JPA Sub-system use P/N: QMC-JPA-MCA01View Datasheet
View JPA Operations Manual
View Step File
View Outline Drawing
-
Quantum Microwave Offers Affordable Used Components
Each component will be rated on a quality scale from: Brand New - Like New - Excellent - Good - Fair - Poor Please request a quote using the product part number provided on the inventory list below. If there is no part number, please use the description provided in the part number section and the manufacturer name. As is the case for all of our products in stock, used product prices are provided on the inventory list below. Click to View:Used Components Inventory
-
LNF-LNC19_34WA
19-34 GHz Cryogenic Low Noise Amplifier FEATURES:- RF bandwidth: 19-34 GHz
- Noise Temperature: 10.5 K typical
- Noise Figure: 0.15 dB typical
- Gain: 28 dB
- DC-power: Vd=1 V, Id=14 mA
- One gate and one drain supply only
- RF-connector: WR34, UG1530/U
- DC-connector: 9-pin female Nano-D
View Datasheet
View Step File
-
LNF-LNR19_34WA
19-34 GHz Low Noise Amplifier FEATURES:- RF bandwidth: 19-34 GHz
- Noise Temperature: 142 K typical
- Noise Figure: 1.73 dB typical
- Gain: 31 dB
- DC-power: Vd=1.60 V, Id=40 mA
- One gate and one drain supply only
- RF-connectors: WR34, UG1530/U
- DC-connector: 9-pin female Nano-D
No online pricing available at this time. Please request a quote.View Datasheet
View Step File
-
LNF-LNR55_96WA_SV
55-96 GHz Low Noise AmplifierFEATURES:- Room Temperature LNA
- RF bandwidth: 55-96 GHz
- Noise temperature: 280 K
- Noise figure: 2.86 dB
- Gain: 27 dB
- DC power: Vds=5 V, Ids=40 mA
- RF connectors: WR12, UG387/U
- DC connector: 2-pin Turret Connector, Single 5V supply only
No online pricing available at this time. Please request a quote.View Datasheet
View Step File
-
LNF-LNC4_8E
4-8 GHz Cryogenic Low Noise Amplifier (GPPO)- RF Bandwidth: 4-8 GHz
- Noise Temperature: 1.5 K
- Noise Figure: 0.022 dB
- Gain: 42 dB
- DC power (typical): Vds = 0.7 V, Ids = 15 mA*
- RF Connectors: Male GPPO**
- DC Connectors: 5-pin Female Strip
- One gate and one drain supply only
- Stackable 140 mil pitch
View Datasheet
View Step File
-
LNF-ISC2.8_4.3A and LNF-CIC2.8_4.3A
LNF-ISC2.8_4.3A and LNF-CIC2.8_4.3A are ultra-low insertion loss cryogenic isolators and circulators operating in the 2.8-4.3 GHz frequency range. They have been designed from ground up to meet the strict requirements of ultra-low temperature physics research. The gold plated OFHC copper body ensures minimum loss and that this loss reaches the lowest possible temperature to minimize thermal noise. The isolator/circulator is packaged in a slim coaxial module using industry standard SMA connectors. The module measures 43.94×43.18×12.7 mm excluding the connectors. Please request a quote.View Datasheet
-
LNF-ISC4.3_4.9A or LNF-CIC4.3_4.9A
LNF-xxxxxxC4.3_4.9A is ultra-low insertion loss cryogenic isolator/circulator operating in the 4.3-4.9 GHz frequency range. They have been designed from ground up to meet the strict requirements of ultra-low temperature physics research. The gold plated OFHC copper body ensures minimum loss and that this loss reaches the lowest possible temperature to minimize thermal noise. The isolator/circulator is packaged in a slim coaxial module using industry standard SMA connectors. The module measures 67.06×24.64×10.16 mm excluding the connectors. Please request a quote.View Datasheet
-
LNF-LNC4_8F
4-8 GHz Cryogenic Low Noise Amplifier FEATURES:- RF bandwidth: 4-8 GHz
- Noise Temperature: 1.5 K typical
- Noise Figure: 0.022 dB typical
- Gain: 44 dB
- DC-power: Vd=0.70 V, Id=15 mA
- One gate and one drain supply only
- RF-connectors: female SMA
- DC-connector: 9-pin female Nano-D
No online pricing available at this time. Please request a quote.View Datasheet
View Step File
-
LNF-VTL_WR10A
- WR-10 Precision Cryogenic Noise Source
- RF Bandwidth 65-118 GHz
- Waveguide Flange UG387/U
- Return Loss Better than 20 dB
- Accuracy ≈ 1 K
- Temperature sensor DT-670A1-SD
- Heater 50 Ω
- DC Connectors 9-pin female Nano-D
- Return Loss 65-75 GHz: 20 dB
- Return Loss 75-118 GHz: 25 dB
- Temp sensor current 10 µA
- Heater power for TH = 30 K (Tamb = 5 K) ~ 2-3 mW
No online pricing available at this time. Please request a quote.View Datasheet
-
LNF-VTL_WR12B
- WR-12 Precision Cryogenic Noise Source
- RF Bandwidth 52-97 GHz
- Waveguide Flange UG387/U
- Return Loss: Better than 20 dB
- Accuracy ≈ 1 K
- Temperature sensor DT-670A1-SD
- Heater 50 Ω
- DC Connectors 9-pin female Nano-D
- Return Loss >20 dB
- Temp sensor current 10 µA
- Heater power for TH = 30 K (Tamb = 5 K) ~ 2-3 mW
No online pricing available at this time. Please request a quote.View Datasheet
-
LNF-VTL_WR15C
- WR-15 Precision Cryogenic Noise Source
- RF Bandwidth 44-80 GHz
- Waveguide Flange UG385/U
- Return Loss Better than 20 dB
- Accuracy ≈ 1 K
- Temperature sensor DT-670A1-SD
- Heater 50 Ω DC
- Connectors 9-pin female Nano-D
- Return Loss 44-47 GHz 20 dB
- Return Loss 47-80 GHz 25 dB
- Temp sensor current 10 µA
- Heater power for TH = 30 K (Tamb = 5 K) ~ 2-3 mW
No online pricing available at this time. Please request a quote.View Datasheet
-
LNF-VTL_WR22C
- WR-22 Precision Cryogenic Noise Source
- RF Bandwidth 29-53 GHz
- Waveguide Flange UG599/U
- Return Loss Better than 20 dB
- Accuracy ≈ 1 K
- Temperature sensor DT-670A1-SD
- Heater 50 Ω
- DC Connectors 9-pin female Nano-D
- Return Loss 29-30 GHz 20 dB
- Return Loss 30-53 GHz 30 dB
- Temp sensor current 10 µA
- Heater power for TH = 30 K (Tamb = 5 K) ~ 2-3 mW
No online pricing available at this time. Please request a quote.View Datasheet
-
LNF-VTL_WR28A
- WR-28 Precision Cryogenic Noise Source
- RF Bandwidth 23-42 GHz
- Waveguide Flange UG599/U
- Return Loss Better than 20 dB
- Accuracy ≈ 1 K
- Temperature sensor DT-670A1-SD
- Heater 50 Ω
- DC Connectors 9-pin female Nano-D
- Return Loss 23-26 GHz 20 dB
- Return Loss 26-42 GHz 30 dB
- Temp sensor current 10 µA
- Heater power for TH = 30 K (Tamb = 5 K) ~ 2-3 mW
No online pricing available at this time. Please request a quote.View Datasheet
-
LNF-LNC45_77WA
45-77 GHz Cryogenic Low Noise Amplifier FEATURES:- RF bandwidth: 45-77 GHz
- Noise Temperature: 13 K typical
- Noise Figure: 0.19 dB typical
- Gain: 33 dB
- DC-power: Vd=0.7 V, Id=13 mA
- One gate and one drain supply only
- RF-connectors: WR15, UG387/U
- DC-connector: 9-pin female Nano-D
No online pricing available at this time. Please request a quote.View Datasheet
View Step File
-
LNF-LNC4_8SF
4-8 GHz Cryogenic Low Noise Amplifier (G3PO)- RF bandwidth: 4-8 GHz
- Noise Temperature: 1.5 K typical
- Noise Figure: 0.022 dB typical
- Gain: 44 dB
- DC-power: Vd=0.70 V, Id=15 mA
- One gate and one drain supply only
- RF-connectors: Male G3PO
- DC-connector: 5-pin female strip connector
- Stackable: 140 mil pitch
No online pricing available at this time. Please request a quote.View Datasheet

-
LNF-PS8 is a compact 8-channel power supply designed for LNF’s Low Noise Amplifiers. The drain voltage is regulated and adjustable within a wide range, and the gate voltage is automatically and continuously adjusted to give a set drain current. Vd, Vg and Id are displayed on the LCD monitor screen for easy bias control. Vd and Id are set by trim potentiometers on the front panel. The LNF-PS8 is redesigned from ground up and features new low noise electronic components for much improved performance compared to previous models. There’s also a drain voltage sense function for situations where bias wire resistance is significant. The display can be switched off for ultra-low noise operation. The power supply is powered by LNF’s Power Block, LNF-PBA-HP.View Datasheet
View 5 Pin Step File
View D-Sub Step File

-
LNF-PS4 is a compact 4-channel power supply designed for LNF’s Low Noise Amplifiers. The drain voltage is regulated and adjustable within a wide range, and the gate voltage is automatically and continuously adjusted to give a set drain current. Vd, Vg and Id are displayed on the LCD monitor screen for easy bias control. Vd and Id are set by trim potentiometers on the front panel. The LNF-PS4 is redesigned from ground up and features new low noise electronic components for much improved performance compared to previous models. There’s also a drain voltage sense function for situations where bias wire resistance is significant. The display can be switched off for ultra-low noise operation. The power supply is powered by LNF’s Power Block, LNF-PBA-HP.View Datasheet
View 5 Pin Step File
View D-Sub Step File

-
LNF-LNC4_8F
4-8 GHz Cryogenic Low Noise Amplifier FEATURES:- RF bandwidth: 4-8 GHz
- Noise Temperature: 1.5 K typical
- Noise Figure: 0.022 dB typical
- Gain: 26 dB typical
- DC-power: Vd=0.70 V, Id=10 mA
- One gate and one drain supply only
- RF-connectors: female SMA
- DC-connector: 9-pin female Nano-D
No online pricing available at this time. Please request a quote.View Datasheet
View Step File
-
LNF-LNC4_8SF_LG
4-8 GHz Cryogenic Low Noise Amplifier (G3PO)- RF bandwidth: 4-8 GHz
- Noise Temperature: 1.5 K typical
- Noise Figure: 0.022 dB typical
- Gain: 26 dB
- DC-power: Vd=0.70 V, Id=10 mA
- One gate and one drain supply only
- RF-connectors: Male G3PO
- DC-connector: 5-pin female strip connector
- Stackable: 140 mil pitch
No online pricing available at this time. Please request a quote.View Datasheet

-
Out of stock
QMC-AMP10-94102530HF
-
WR-10 GaN Power Amplifier
-
Frequency: 89 to 99 GHz
-
Waveguide In/Out WR-10, UG-387/U-M
-
Gain: 25 dB typical
-
P1dB: 28 dBm typical
-
PSAT: 30 dBm typical
-
DC: 20V at 740 MA typical
-
Notes: Comes with Removable Heat Sink & Fan
-
Export Classification: 3A001.b.4.e.2
-
A license may be required if exported outside of the USA
View Datasheet
View Step File
-
-
Commercial Classification: 3A001.b.4.e.3QMC-AMP10-94101330HF
WR-10 GaN Power Amplifier
-
WR-10 GaN Power Amplifier
-
Frequency: 90 to 99 GHz
-
Waveguide In/Out WR-10, UG-387/U-M
-
Gain: 13 dB typical
-
P1dB: 27 dBm typical
-
PSAT: 30 dBm typical
-
DC: 20V at 420 MA typical
Notes: Comes with Removable Heat Sink & Fan
View Datasheet
View Step File
-
-
QMC-MX6-10N30HF
Technical Specifications:-
W-Band Active X6 Multiplier
-
GaAs Multiplier plus GaN Amplifier
-
Fin: 14.1 to 16.7, SMA Female
-
Input Power +8 dBm typical, +10 dBm max
-
Fout: 87 to 97 GHz
-
Pout: +30 dBm (1W) typical
-
DC 20V at 1.3A
-
Harmonics: -20 dBc typical
-
Waveguide out: WR-10, UG-387/U
-
With a Removable Heat Sink and Fan
-
Heat Sink Dimensions: 3.2 x 3.2 in
-
Export Classification: 3A001
View Datasheet
View Multiplier Step File
View Amplifier Step File
-
-
LNF-PBA-HP
Coming Soon
No online pricing available at this time. Please request a quote.View Step File
-
LNF-CIC0.9_1.1A
LNF-CIC0.9_1.1A is ultra-low insertion loss cryogenic circulators operating in the 0.9-1.1 GHz frequency range. It has been designed from ground up to meet the strict requirements of ultra-low temperature physics research. The gold plated OFHC copper body ensures minimum loss and that this loss reaches the lowest possible temperature to minimize thermal noise. The circulator is packaged in a slim coaxial module using industry standard SMA connectors. The module measures 31.5×30.86×12.7 mm excluding the connectors.RF bandwidth: 0.9-1.1 GHzInsertion loss: 0.3 dB typicalIsolation: 20 dB typicalPort match: 20 dB typicalRF connectors: Female SMA -
5-7 GHz Wide Bandwidth Josephson Junction Parametric Amplifier Fully Assembled, Tested and Characterized Sub-System
QMC-JPA-MCA01
Comes with: BBN-PS2-JPA-DEVICE-QEC Specifications:- Wide Bandwidth Josephson Junction Parametric Amplifier
- Tunable Center Frequency: 5.0 – 7.0 GHz
- Gain: 20 dB minimum
- Instantaneous Bandwidth: 300 MHz
- Noise temperature: 295 mK @ 6.8 GHz
- Matched input: 50 Ohm
- Compact Aluminum cryo-package
- Connector In/Out: 2.92mm K connectors
- Designed for use at millikelvin temperatures
No online pricing available at this time. Please request a quote using the tab above. Data of the JPA Sub-Systems that we have in stock. Feel free to request a serial number. First come, first serve. JPA-MCA01 SN: 124 JPA-MCA01_S/N: 125 JPA-MCA01 S/N:_152 JPA-MCA01_S/N: 153 JPA-MCA01_S/N: 154 JPA-MCA01_S/N: 155 JPA-MCA01 S/N: 156 JPA-MCA01 S/N:_157View Datasheet
View JPA Operations Manual
View Step File
View Outline Drawing
-
Silent Waves Original TWPA: THE ARGO
Specifications:- SMA connectors
- 50 Ω matched
- Plug & Play
- Low pump power
- Flux insensitive
No online pricing available at this time. Please request a quote using the tab above. Silent-Waves WebsiteView Datasheet
-
Silent Waves Wide Bandwidth TWPA: THE CARTHAGO
Specifications:- SMA connectors
- Ultra Low Noise
- Wideband
- 50 Ω matched
- Highly Tunable
- Low pump power
- Gain: >18 dB
- Bandwidth: 4 GHz
- Noise: <1K at maximum gain
- Saturation power: -105 dBm (at 20 dB)
- In-situ tunability pump from 4 GHz to 8 GHz
Silent-Waves WebsiteView Datasheet
